Construction · Batala, Punjab
Rebar Cutting & Bending
Rebar cutting and bending machines
Bar cutters and benders for reinforced concrete work — round bar, TMT and deformed bar, plus flat, square and angle. Built for site conditions, on wheels, with enclosed gear boxes that run two months on one oil fill.
The machine
Machine photographs
More views
Close-ups of the working end, controls and tooling are available on request, with a short video of the machine running.
Ask for more photosCutting
Rebar cutting machines
Ductile iron body, enclosed gear box with splash lubrication, and front wheel steering so the machine moves around a site instead of staying where it was unloaded.
Some figures for this machine are confirmed against the specific model at order stage and are not published here. Ask for the full specification sheet and we will send it the same day.
GQ series bar cutting machine
GQ40 · GQ50| Model | GQ40 | GQ50 |
|---|---|---|
| Carbon steel round bar | up to Ø 40 mm | up to Ø 50 mm |
| Deformed bar (Grade III) | up to Ø 32 mm | Up to Ø40 mm |
| Max flat steel | 70 × 15 mm | 80 x 18 mm |
| Max square steel | 32 × 32 mm | 40 x 40 mm |
| Max angle steel | 50 × 50 mm | 63 x 63 mm |
| Drive | ||
| Cutting frequency | 32 / min | 28 cuts/min |
| Cutting stroke | 34 mm | Approx. 70 mm blade stroke |
| Motor power | 3 kW | 4 kW |
| Motor speed | 2880 rpm | 2880 rpm |
| Supply | 380 V, 50 Hz | 380 V, 50 Hz |
| General | ||
| Overall dimensions | 1280 × 470 × 730 mm | 1280 x 480 x 740 mm |
| Weight | 440 kg | 640 kg |
Bending
Rebar bending machines
Geared bending tables for bar schedules, cranks and hooks, with an angle stop so every bend in a batch comes out the same.
GW series bar bending machine
GW40 · GW50| Model | GW40 | GW50 |
|---|---|---|
| Carbon steel round bar | 6–40 mm | 6–50 mm |
| Deformed bar | 6–32 mm | Ø6–36 mm |
| Bending speed | 5–10 times / min | 5 / 10 bends/min |
| Motor power | 3 kW | 4 kW |
| Supply | 380 V, 50 Hz | 380 V, 50 Hz |
| Weight | 279 kg net | 345 kg net |
Who buys them
Construction and infrastructure
- Building contractors
- Infrastructure projects
- Bridge and flyover work
- Precast yards
- Rebar fabrication shops
- Steel traders
- Irrigation and canal works
- Industrial construction
Cut and bend together
Most sites buy the pair. A cutter without a bender leaves the hooks and cranks to be done by hand, which is where the time goes.
Two months on one fill
Enclosed gear box with splash lubrication. Eight kilos of gear oil runs it for months rather than needing daily attention on a dusty site.
Make your own stirrups
Buying ties in costs several times what making them costs. A stirrup bender pays back inside one reasonable project.
Seen before it ships
You are welcome at Batala to see your machine running before dispatch, with a written inspection and dispatch certificate.
Delivered across India
We arrange transport from Batala to your site, so you are not chasing a transporter yourself.
One year warranty
Covered against technical fault for a full year from delivery, on every machine we supply.
Support that answers
Most questions are settled the same day over a video call with someone who knows the machine.
Freight and site visits are charged at actual. Installation is not included in the machine price and can be arranged on request.
Before you enquire
Rebar machine questions
Why a machine instead of cutting on site by hand?
What is the difference between round bar and deformed bar capacity?
Can the cutter handle flat and angle too?
What is a stirrup bender?
What supply do they need?
Tell us the size. We’ll send the price today.
Message the bed length, swing and bore you need — or just describe the job. You’ll get specifications and a price the same working day.
Specifications are subject to change without notice as machines are continuously improved. Dimensions shown are nominal. Please confirm the final specification on your order acknowledgement.