Home / Sheet-Metal & Forming / Power Press & Hydraulic Press

Presses · Batala, Punjab

Power Press & Hydraulic Press

Power press and hydraulic press machines, 5 to 250 tonne

Mechanical power presses in C frame and pillar frame, hand-operated hydraulic shop presses from 10 tonne, and powered hydraulic presses for forming, drawing and assembly work. Built to your component rather than sold off a shelf — send the drawing and we confirm the tonnage.

Request a Quote WhatsApp Us

5–250 TCapacity

C & pillarFrame types

Mech & hydDrive options

4thGeneration, since 1950

The machine

Machine photographs

More views

Close-ups of the working end, controls and tooling are available on request, with a short video of the machine running.

Ask for more photos

Mechanical

Power press machines

Flywheel and clutch driven, for fast repetitive work — blanking, piercing, punching and stamping. C frame from 5 tonne and H frame pillar type from 10 tonne, both to 250 tonne.

C-type power press

5 to 250 tonne · open front, three sides clear

Open on three sides, so loading, unloading and manual feeding are easy. The usual choice for smaller components and shorter cycles, and available right up to 250 tonne where the load is central.

Capacity	5 T	10 T	20 T	30 T	50 T	75 T	100 T	150 T	200 T	250 T
Crank shaft dia.	51	60	76	83	105	121	134	152	158	165?
Hole in bed	63	76	83	89	127	127	178	191	216	229
Strokes / min	85	76	60	60	55	50	45	40	30	30
Motor required	0.5 HP	1 HP	2 HP	3 HP	5 HP	7.5 HP	10 HP	15 HP	20 HP	25 HP

H-type pillar power press

10 to 250 tonne · closed frame

Closed frame with the load carried through both housings, which keeps the ram square under heavy and off-centre work. Where the die is large or the load is not central, this is the frame to take.

Capacity	10 T	20 T	30 T	50 T	75 T	100 T	150 T	200 T	250 T
Crank shaft dia.	63	76	76	95	105	127	152	160	165
Thickness of bolster	55	63	63	76	98?	102	102	115	127
Strokes / min	70	60	60	55	50	40	30	30	25
Motor required	1 HP	2 HP	3 HP	5 HP	7.5 HP	10 HP	15 HP	20 HP	25 HP

Also built: inclinable type, deep throat, double crank and pneumatic clutch models. Capacities above 250 tonne to order.

Hand operated

Manual hydraulic press, 10 to 150 tonne

Hand-pumped shop presses for straightening, forming, bearing and bush work, and general press jobs. No power supply needed, so they go anywhere in the shop. Motorised versions of the same frames are available.

Manual hand-operated hydraulic press

10 · 20 · 40 · 60 · 80 · 100 · 125 · 150 tonne

Capacity	10 T	20 T	40 T	60 T	80 T	100 T	125 T	150 T
Overall height	52″	60″	72″	83″	84″	93–94″	96″	96″
Cylinder size	100 + 115	125 × 140	140 × 160	160 × 180	200 × 220	200 × 220	220 × 250	250 × 280
Ram size	55 mm	65 mm	75 mm	85 mm	95 mm	105 mm	115 mm	125 mm
Stroke	125 mm	125 mm	135 mm	155 mm	155 mm	160 mm	175 mm	175 mm
Approx. weight	120 kg	225 kg	425 kg	725 kg	900 kg	1,200 kg	1,350 kg	1,410 kg

Supplied with: two V-blocks and a set of spare seals. Motorised power pack available on the same frames.

Powered

Hydraulic press machines

Full tonnage at any point in the stroke, with pressure and speed set by the operator. The right choice for deep drawing, forming thicker sections, straightening and press-fit assembly.

H frame / pillar type

Closed frame for rigidity under heavy and off-centre loads. General purpose forming, straightening and assembly across the tonnage range.

C frame type

Open on three sides for easy loading and manual feeding. Suits smaller components and shorter cycles.

Four column type

Four guided pillars keep the platen parallel on wide work. Used for deep drawing and larger die areas.

Configured to the job

Tonnage, daylight, stroke, table size and ram speed are all set against your component. Multiple speeds for approach, pressing and return cut cycle time.

Safety built in

Overload protection through hydraulic and electrical interlocks, and two-hand operator controls to keep hands clear of the die during the stroke.

Included in the price

Standard accessories

Optional, at extra cost

What they do

Press operations

Who buys them

Send the drawing

Give us the component and material and we work out the tonnage rather than selling you a size and hoping.

Delivered across India

We arrange transport from Batala to your site, so you are not chasing a transporter yourself.

One year warranty

Covered against technical fault for a full year from delivery, on every machine we supply.

Support that answers

Most questions are settled the same day over a video call with someone who knows the machine.

Freight and site visits are charged at actual. Installation is not included in the machine price and can be arranged on request. Dies are not supplied unless specified.

Before you enquire

Press buying questions

Power press or hydraulic press — which do I need?

A mechanical power press is faster and cheaper to run, and it is the right machine for repetitive blanking, piercing and stamping of sheet. A hydraulic press gives full tonnage anywhere in the stroke and lets you set the pressure, which matters for deep drawing, forming thicker sections and assembly work. For high volume on thin sheet, mechanical. For control and depth, hydraulic.

What is the difference between C type and pillar type?

A C frame is open on three sides, so loading and unloading is easy and it suits smaller work and manual feeding. A pillar or H frame is closed and far more rigid, which keeps the ram square under load. Above about 75 tonnes, or on off-centre loads, the pillar type is the safer choice.

What tonnage do I need?

It depends on the perimeter you are cutting and the thickness and grade of material. As a rough guide for mild steel, force in tonnes is roughly the cut perimeter in mm multiplied by thickness in mm, divided by 285. Send us the component drawing and we will work it out and confirm the size.

Do I need power for a manual hydraulic press?

No. The hand-operated presses are pumped by lever, so they work anywhere in the shop with no electrical connection. If you are doing the same job repeatedly and the lever becomes the bottleneck, the same frames are available with a motorised power pack.

Do you supply dies?

The press is supplied without dies unless specified. We can arrange die sets against your component drawing — tell us at the time of enquiry.

What safety features are fitted?

Two-hand operating controls are available on all models and we recommend them on every machine. Flywheel and gear guards are standard. Where the operator feeds by hand, discuss guarding with us before you order rather than after.

What foundation and power supply is needed?

Three phase supply sized to the motor, and a concrete foundation appropriate to the machine weight. We send the foundation drawing with the order.

← See our lathe machines

Tell us the size. We’ll send the price today.

Message the bed length, swing and bore you need — or just describe the job. You’ll get specifications and a price the same working day.

WhatsApp +91 81959 51515 Call now Email us

Specifications are subject to change without notice as machines are continuously improved. Dimensions shown are nominal. Please confirm the final specification on your order acknowledgement.