Section bending · Batala, Punjab
Section Bending
Beam and profile bending machines
Horizontal three roll benders that roll I-beam, channel, angle, pipe and tube into arcs and full circles. Skid mounted and driven through geared heads, so the machine works at site as readily as in the shop — tunnel and mine arch supports, curved trusses, tank rings and architectural steel.
The machine
Machine photographs
More views
Close-ups of the headstock, tooling and controls are available on request, along with a short video of the machine running.
Ask for more photosThe range
Two capacities
Rated by section modulus rather than height, so capacity depends on the profile as well as its size. Send the section and radius and we confirm which machine holds it.
Horizontal beam and profile bender
250 · 300 series| Model | W24S-250 | W24S-300 |
|---|---|---|
| Bending capacity, section modulus | 250 cm³ | 300 cm³ |
| Max material yield strength | 250 MPa | 250 MPa |
| Rolls and drive | ||
| Layout | Horizontal bed, three roll | Horizontal bed, three roll |
| Drive heads | Two geared drive units | Two geared drive units |
| Centre roll | Adjustable for radius | Adjustable for radius |
| Roll drive | Powered through geared reducers | Powered through geared reducers |
| Side guide rolls | Three axis, hydraulic | Three axis, hydraulic |
| Site use | Skid mounted, works outdoors at site | Skid mounted, works outdoors at site |
| Control | ||
| Transmission | Full hydraulic | Full hydraulic |
| Digital readout accuracy | ± 0.1 mm | ± 0.1 mm |
| Bending speed | 4–6 m/min | 4–6 m/min |
| Overload protection | Hydraulic and electrical | Hydraulic and electrical |
| Control | Foot pedal with emergency stop, portable panel | Foot pedal with emergency stop, portable panel |
| General | ||
| Main motor | 30 kW | 37 kW |
| Machine weight | 22,000 kg | 26,000 kg |
| Overall dimensions | Approx. 3,500 × 2,500 × 3,000 mm | Approx. 3,800 × 2,800 × 3,200 mm |
What it makes
Typical work
- Tunnel and mine arch supports
- Curved roof trusses
- Portal frames
- Tank and silo rings
- Circular staircases
- Arches and canopies
- Ship and boat frames
- Crane rails
- Architectural steelwork
- Pipe coils and bends
Arcs and full circles
Roll a gentle arc in channel, or close a complete ring and correct the roundness in the same operation without a second setup.
Works at site
Skid mounted and self-contained, so it goes to the tunnel mouth or the fabrication yard instead of the section travelling to a shop.
Send the drawing
Section size, radius and arc length. We confirm in writing whether the machine holds it before quoting.
Seen before it ships
You are welcome at Batala to see your machine running before dispatch, with a written inspection and dispatch certificate.
Delivered across India
We arrange transport from Batala to your site, so you are not chasing a transporter yourself.
One year warranty
Covered against technical fault for a full year from delivery, on every machine we supply.
Support that answers
Most questions are settled the same day over a video call with someone who knows the machine.
Freight and site visits are charged at actual. Installation is not included in the machine price and can be arranged on request.
Before you enquire
Section bending questions
What sections can it bend?
Can it make a full 360 degree ring?
Why do side guide rolls matter?
W24S-250 or W24S-300?
What is it used for?
Can you bend to a drawing?
Tell us the size. We’ll send the price today.
Message the bed length, swing and bore you need — or just describe the job. You’ll get specifications and a price the same working day.
Specifications are subject to change without notice as machines are continuously improved. Dimensions shown are nominal. Please confirm the final specification on your order acknowledgement.